Product Details:
Charger Type | Analog |
Brand | Elak |
Model | C 10/72 |
Max Current | 10 Amps |
Output Voltage | 12 - 72 V |
Max Number of Batteries | 6 |
Dimension | 47 x 26 x 42 (cms) |
Nett Weight | 25 (kgs) |
Product Details:
Usage/Application | Battery Charging |
Brand | Elak |
Warranty | 12 months |
Max Current | 6 Amps |
Output Voltage | 6 - 72 V |
Max Number of Batteries | 6 |
Dimension | 47 x 26 x 42 (cms) |
Nett Weight | 19 (kgs) |
Model | C 6/72 |
Product Details:
Brand | Elak |
Output Voltage | 6 - 24 V |
Current | 6 A(Max) |
Charger Type | Analog |
Usage/Application | Battery Charging |
Warranty | 12-24 months |
Max Number of Batteries | 2 |
Dimension | 34 x 34 x 22 (cms) |
Nett Weight | 10 (kgs) |
Model | CC-6/24 |
Voltage | 230 V |
Frequency | 50 Hz |
Power Supply | Single Phase AC Mains Supply |
ELAK Multi-Battery Chargers are designed for use in workshops, garages, battery service stations and retail outlets, where there is a requirement for charging a number of batteries simultaneously.
The Multi-battery chargers are available in 10 different models to charge from 2 to 12 batteries, in series. Models are available from 6 Amps to 20 Amps.
These chargers are also known as 'taper chargers' since charging current reduces gradually, as the battery gets charged. However they will not shut-off automatically. A voltmeter or hydrometer is required to check the battery condition periodically and switch off the charger, once the batteries are fully charged.
The chargers are fitted with double wound mains isolated transformer using copper wire. Rectification is done means of a full wave bridge rectifier.
Charge current and voltage control is effected by means of coarse and fine tapping switches from the mains transformer. Protection for the charger is provided by means of circuit breakers on the A.C. and D.C. side.
These chargers are built in aesthetically designed thick sheet metal cabinets.
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | For testing the complete range of 12 V automotive batteries |
Model Name/Number | BCT - 700 |
Rated Voltage | 6 Volt |
Brand | Elak |
Warranty | 1 Year |
Weight | 6 kgs |
Dimension | 33 x 28 x 16.5 (cm) |
Loads | 100/175/300/450 Amps |
Timer | Automatic(5 sec) |
ELAK Battery Testers are high-rate discharge testers. These testers impose a load on the battery, which is equivalent to that drawn by the starter motor from the battery, while cranking the engine.
The tester studies the drop in battery voltage & indicates the condition of the battery – if it is capable of starting the engine or not.
All the 3 models are fitted with a high quality 31⁄2 digit LED voltmeter, which is powered by the battery under test.
The testers have a built-in circuit, which senses the drop in battery voltage under load and indicates if the battery is sufficiently charged, weak or dead, by means of 3 coloured LED's.
The model BCT-700 have a timer built-in which automatically dis-connects the load after 5 seconds.
We being authorised Distributors of SF SONIC Batteries are offering an 35 BH range of SF Sonic Two Wheeler, Three Wheeler Auto,Four Wheeler Car,Heavy DutyTractor,Truck Batteries,Inverters & Inverter Batteries.
We also have above given range of Inverter & Batteries of Exide & Amaron Brand.
We are authorised Dealer of ELAK Battery Chargers & Testers of all range as below.
Automotive,Multi Batteries,Two Wheeler,Automatic,Fast Chargers & Battery Testers.
We also have HBL Genset Maintenance Free Battery with Inbuilt SMPS Charger
Features
FLORA BATTERY CORPORATION
HYDERABAD.
Product Details:
Type | Electric |
Output Voltage (V) | 24 V |
Warranty | 1 Year |
Weight (Kg) | 7 |
Model Number | AC-02 |
Brand | Elak |
Max Current | 5 Amps |
End Voltage | 28.8 V |
Dimension | 26 x 26 x 16 (cm) |
Elak automatic chargers are designed to provide fast, safe and efficient charging to a wide variety of battery types and sizes. The electronic control circuit monitors the charging process to avoid battery damage caused by overcharging.
The charger collects information from the battery and adjusts the charge current and voltage based on this information. This allows the battery to be charged quickly, correctly, and completely when using an Automatic battery charger.
Automatic battery chargers can remain connected to the battery indefinitely and will not overcharge or damage it.
Automatic Battery Chargers are fitted with an electronic control circuit which monitors the battery voltage and accordingly supplies the required charging current through Thyristors (SCR's) to the battery.
The chargers have a WU charging characteristics, i.e. constant current – current voltage.
The chargers are protected against over-load, short-circuit and reverse polarity.
Charging current is indicated by a high quality ammeter. Some models have controls for adjusting the charging current and also the no. of batteries (12V or 24V).
LED's are provided to indicate the mode of operation of the charger, whether it is in the charging (boost) mode, or charged (float) mode. Some models also have an end voltage selector switch for charging regular Lead Acid and Maintenance Free/VRLA batteries.
Product Details:
Minimum Order Quantity | 1 Piece |
Type | Electric |
Brand | Elak |
Input Voltage | 12 to 24 V |
Usage/Application | Battery Charging |
Warranty | 1 Year |
Output Voltage (V) | 12 V or 24 V |
Current (A) | 0-15 Amps or 0-10 Amps |
Weight (Kg) | 11 kg(Net Weight) |
Voltage (V) | 230 V |
Model Number | AC-04 |
Automation Grade | Automatic |
Dimension Mm | 34 x 26 x 16 cm |
End Voltage | 13.8 V/14.4 V or 27.6 V/28.8 V |
Elak automatic chargers are designed to provide fast, safe and efficient charging to a wide variety of battery types and sizes. The electronic control circuit monitors the charging process to avoid battery damage caused by overcharging.
The charger collects information from the battery and adjusts the charge current and voltage based on this information. This allows the battery to be charged quickly, correctly, and completely when using an Automatic battery charger.
Automatic battery chargers can remain connected to the battery indefinitely and will not overcharge or damage it.
Automatic Battery Chargers are fitted with an electronic control circuit which monitors the battery voltage and accordingly supplies the required charging current through Thyristors (SCR's) to the battery.
The chargers have a WU charging characteristics, i.e. constant current – current voltage.
The chargers are protected against over-load, short-circuit and reverse polarity.
Charging current is indicated by a high quality ammeter. Some models have controls for adjusting the charging current and also the no. of batteries (12V or 24V).
LED's are provided to indicate the mode of operation of the charger, whether it is in the charging (boost) mode, or charged (float) mode. Some models also have an end voltage selector switch for charging regular Lead Acid and Maintenance Free/VRLA batteries.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Charger Type | Analog |
Model | C 20/72 |
Brand | Elak |
Max Current | 20 Amps |
Output Voltage | 12 - 72 V |
Max Number of Batteries | 6 |
Dimensions | 58 x 30 x 51 (cms) |
Nett Weight | 40 (kgs) |
Product Details:
Minimum Order Quantity | 1 Piece |
Vehicle Type | Car, Truck, Bike |
Brand | Elak |
Warranty | 12 months |
Usage/Application | Battery Charging |
Charger Type | Analog |
Size | 30x18x20 cm |
Current (A) | 1 A (Max) |
Model Number | C 1/96 |
Output Voltage | 12 V |
Number of Batteries | 8 |
Nett Weight | 6.5 (kgs) |
Product Details:
Minimum Order Quantity | 1 Unit |
Type | Electric |
Vehicle Type | Car |
Brand | Elak |
Model No. | FC 30/24 |
Usage/Application | Battery Charging |
Product Type | Fast Battery Charger |
Output Voltage | 12 to 24 V |
Warranty | 1 Year |
Weight (Kg) | 41 kg |
Charge Current | 30 A |
Protection | Circuit Breakers on A.C & D.C. |
Dimensions | 40 x 26 x 86 (cms) |
Timer | 0 - 120 Min |
We being authorised Distributors of SF SONIC Batteries are offering an exclusive range of SF Sonic Two Wheeler, Three Wheeler Auto,Four Wheeler Car,Heavy DutyTractor,Truck Batteries,Inverters & Inverter Batteries.
We also have above given range of Inverter & Batteries of Exide & Amaron Brand.
We are authorised Dealer of ELAK Battery Chargers & Testers of all range as below.
Automotive,Multi Batteries,Two Wheeler,Automatic,Fast Chargers & Battery Testers.
We also have HBL Genset Maintenance Free Battery with Inbuilt SMPS Charger
Features
FLORA BATTERY CORPORATION
HYDERABAD.
Product Details:
Type | Electric |
Usage/Application | Industrial |
Battery Voltage | 12 V(Output) |
Model No. | AC-01 |
Brand | Elak |
Weight (Kg) | 6.5 kg |
Automation Grade | Automatic |
Dimension | 26 x 26 x 16 (cm) |
End Voltage | 14.4 V |
Current | 5 Amps |
Elak automatic chargers are designed to provide fast, safe and efficient charging to a wide variety of battery types and sizes. The electronic control circuit monitors the charging process to avoid battery damage caused by overcharging.
The charger collects information from the battery and adjusts the charge current and voltage based on this information. This allows the battery to be charged quickly, correctly, and completely when using an Automatic battery charger.
Automatic battery chargers can remain connected to the battery indefinitely and will not overcharge or damage it.
Automatic Battery Chargers are fitted with an electronic control circuit which monitors the battery voltage and accordingly supplies the required charging current through Thyristors (SCR's) to the battery.
The chargers have a WU charging characteristics, i.e. constant current – current voltage.
The chargers are protected against over-load, short-circuit and reverse polarity.
Charging current is indicated by a high quality ammeter. Some models have controls for adjusting the charging current and also the no. of batteries (12V or 24V).
LED's are provided to indicate the mode of operation of the charger, whether it is in the charging (boost) mode, or charged (float) mode. Some models also have an end voltage selector switch for charging regular Lead Acid and Maintenance Free/VRLA batteries.
Product Details:
Type | Electric |
Brand | Elak |
Model No. | AC-07 |
Usage/Application | Two Wheeler Battery Charging |
Warranty | 3 Years |
For Charging Motor Cycle Batteries | 12 V |
Number of batteries | 1 |
Constant Charging Current | Yes |
Charging Current | 2 A |
Automatic Cut Off | Yes |
Dimension | 26 x 26 x 16 (cm) |
Nett Weight | 11.5 (kg) |
Elak Two-Wheeler Battery Chargers are meant for charging batteries used in Motor-Cycles, Scooters, ATV's, etc.
6 Different models are available. 2 models for manual operation and 4 for automatic operation.
The 2 models of Manual battery chargers can charge from 4 to 8 batteries, in series. The batteries under charge have to be monitored and dis-connected, once they are fully charged.
The Automatic battery chargers can charge battery independently and switch-off, once the batteries are fully charged. These chargers are specially recommended for Maintenance Free batteries which get damaged by over-charging.
Additional Information:
Product Details:
Output Voltage | 12 - 96 V |
Warranty | 12 months |
Charge Current | 10 Amps(Max Current) |
Usage/Application | Battery Charging |
Charger Type | Analog |
Brand | Elak |
Max Number of Batteries | 8 |
Dimension | 58 x 30 x 51 (cms) |
Nett Weight | 34 (kgs) |
Model | C 10/96 |
ELAK Multi-Battery Chargers are designed for use in workshops, garages, battery service stations and retail outlets, where there is a requirement for charging a number of batteries simultaneously.
The Multi-battery chargers are available in 10 different models to charge from 2 to 12 batteries, in series. Models are available from 6 Amps to 20 Amps.
These chargers are also known as 'taper chargers' since charging current reduces gradually, as the battery gets charged. However they will not shut-off automatically. A voltmeter or hydrometer is required to check the battery condition periodically and switch off the charger, once the batteries are fully charged.
The chargers are fitted with double wound mains isolated transformer using copper wire. Rectification is done means of a full wave bridge rectifier.
Charge current and voltage control is effected by means of coarse and fine tapping switches from the mains transformer. Protection for the charger is provided by means of circuit breakers on the A.C. and D.C. side.
These chargers are built in aesthetically designed thick sheet metal cabinets.
Product Details:
Brand | Elak |
Warranty | 12 months |
Usage/Application | Battery Charging |
Charger Type | Analog |
Max Current | 12 Amps |
Output Voltage | 6 - 24 V |
Max Number of Batteries | 2 |
Dimension | 47 x 26 x 42 (cms) |
Nett Weight | 18 (kgs) |
Model | C 12/24 |
ELAK Multi-Battery Chargers are designed for use in workshops, garages, battery service stations and retail outlets, where there is a requirement for charging a number of batteries simultaneously.
The Multi-battery chargers are available in 10 different models to charge from 2 to 12 batteries, in series. Models are available from 6 Amps to 20 Amps.
These chargers are also known as 'taper chargers' since charging current reduces gradually, as the battery gets charged. However they will not shut-off automatically. A voltmeter or hydrometer is required to check the battery condition periodically and switch off the charger, once the batteries are fully charged.
The chargers are fitted with double wound mains isolated transformer using copper wire. Rectification is done means of a full wave bridge rectifier.
Charge current and voltage control is effected by means of coarse and fine tapping switches from the mains transformer. Protection for the charger is provided by means of circuit breakers on the A.C. and D.C. side.
These chargers are built in aesthetically designed thick sheet metal cabinets.
Product Details:
Vehicle Type | Bike |
Usage/Application | Battery Charging |
Brand | Elak |
Battery Type | VRLA |
Battery Voltage | 12 V |
Model Name/Number | MX/50 |
Warranty | 1 year |
Charger Type | Analog |
No. of Batteries | 4 |
Constant Charging Current | Yes |
Charging Current | 0.25 / 0.5/ 0.7 / 0.9 A |
Automatic Cut Off | Yes |
Dimension | 34 x 33 x 22 (cms) |
Weight | 9 (kgs) |
Product Details:
Part Number | C 10/72 |
Product Details:
Vehicle Type | Car |
Brand | ELAK |
Warranty | 24 MONTH |
Product Details:
Brand | ELAK |
Part Number | MX 20 |
Product Details:
Brand | ELAK |
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | Elak |
Part Number | C1 48 |
Product Details:
Brand | Sirius |
Part Number | C 12-48 |
Product Details:
Model Name/Number | BCT-7MX |
Rated Capacity | Batteries of 2.5 and 5 Ah |
Usage/Application | For testing Motor-cycle Batteries |
Warranty | 1 Year |
Brand | Elak |
Weight | 1.25 (kg) |
Load | 10/40 Amps |
Dimension | 25 x 10 x 6 (cm) |
ELAK Motor-Cycle Battery Testers are designed for testing batteries used in motor-cycles, scooters, ATV's, etc.
These testers check the voltage drop of the battery under a fixed load and confirm the status of the battery – full, weak or dead.
The new generation motor-cycle and scooters are fitted with an electrical start. It is therefore very essential to test these batteries under load, to ensure that the batteries are capable of starting the vehicle.
Both the models are fitted with a high quality 31⁄2 digit LED voltmeter, which is powered by the battery under test.
The testers have a built-in circuit, which senses the drop in battery voltage under load and indicates if the battery is sufficiently charged, weak or dead, by means of 3 coloured LED's.
Product Details:
Usage/Application | Motorcycle |
Rated Voltage | 12 Volt |
Model Name/Number | BCT7 BCT7MX |
Brand | ALAK BCT7 |
Warranty | 2 Year |
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | Elak |
Part Number | AC 03 |
Elak Battery Charger AC 03